Useful Tips

How to enable MMS on iPhone

Pin
Send
Share
Send
Send


It happens that periodically iphone owners have to get out of the warm "apple" world and face the harsh reality. This only happens if there are any rare breakdowns or problems with iOS. One of these problems is the mms function turned off.

How to enable the mms function on iPhone 6?


Multimedia messages may not be sent due to various circumstances. It usually happens that on an iPhone the network data is simply incorrectly configured or they are not configured at all. And how, then, to enable the send mms function? The problem is solved very simply - should reset parameters and enter the faithful in the menu of your iphone.

Also, such questions may well arise due to the lack of access to the Internet. One way to verify access is to turn off the Wi-Fi network. After it is disabled, open any search engine and check internet access. Configuring mms can cause some difficulties, especially considering the incomprehensible interface. Iphone 6 does not have the usual heading “Create MMS”. But you can still connect this feature.

Here are some ways to set up MMS:

  1. On the iphone main screen, select “Settings”, then go to the “Messages” menu. In this section you need to find "MMS messages" and check if they are included. Further, in the same menu you should go to the section “Basic” and turn on “Cellular data”, if they are turned off,
  2. If “Cellular data” is turned on, it’s important to check the Internet connection by turning off Wi-Fi on your iPhone and going to any website,
  3. If even now it is not possible to send mms, it remains only to remove the SIM card and then return it back,
  4. Sometimes a simple reboot helps.

After you have done all of the above, the function for sending multimedia messages should work. But, if it did not turn on, then you should check the correctness of the network data.

Checking the correct operation of the mms function

To check the correctness of the entered data, open the multimedia messaging service in iphone.

  1. From the interface go to “Settings”, then to the section “Basic” and “Cellular data”,
  2. In the "Cellular data" section, select "Cellular data network",
  3. In this list, you can find the inclusion of the mms function.

During the first registration, the device itself will determine the operator (Beeline, MTS and others) and send the necessary data. If the device turned out to be unable to send data for registration on the network itself, then check the correctness of the specified data. It happens that even with correctly entered data, the function to send and receive mms does not work. But in any case, you need to fill in all the empty fields.

If, however, mms does not work, then the first thing to do request network parameters. To do this, go to the operator’s official website and get the operator’s service number. All settings can be received via SMS messages.

How to enable mms function on iphone with MTS operator?

Setting up sending multimedia messages for MTS is not very complicated. The first step is to indicate in the section "Cellular Data Network" the parameters for the successful operation of MMS:

  • proxy - 192.168.192.192.8080,
  • username and password - mts,
  • APN - mms.mts.ru.

To activate the MMS function, send SMS to number 8890. The iphone settings for other mobile operators will be similar.

Settings for the new iPhone

On the new device, the mms function is not always turned on. During registration, the user usually receives an SMS message with necessary settings to receive and send multimedia messages.

It happens that the device cannot automatically apply the settings, and then you have to figure it out yourself. All network data can be found on the official website of the mobile operator.

When all the many hours of work on connecting multimedia messages is finally done, the job is small - just send a mms message. To do this, go to the "Messages" section and call up an empty field by clicking on the icon on the right of the screen. In fact, this empty field allows you to send any messages you want, and in order to add a picture you can simply click on the camera icon, which is located to the left of the text input field. In the menu that opens, you should select a photo from the gallery or take a photo on the camera.

After you have selected the image, you only need to select the recipient. It is not difficult - you just need to click on the plus sign and select from the list of contacts. All that remains after this is simply indicate subject and send message. You can also send multimedia messages to a group of people.

IPhone allows you to turn on mms and send a message directly to the camera menu. To do this, just click on the image of the new photo in the camera menu. It will immediately appear in full screen, and at the bottom you will see an icon with an arrow. By clicking on it, you will see a menu where you can select the recipient and send the image.

As you can see, there is nothing particularly complicated in setting up the function of sending multimedia messages on iPhone 6. You just need to be patient and know that if something does not work out right away, then it will surely turn out later.

Turn on MMS on iPhone

To be able to send this type of message from iPhone, you need to make sure that the corresponding function is activated in the phone settings.

    Open "Settings"and then go to the section "Messages".

In block SMS / MMS make sure the option is activated MMS Messages. Make changes if necessary.

  • If Wi-Fi is activated on your phone, temporarily turn it off and check if the mobile Internet is working: its presence is a prerequisite for sending MMS.
  • Reset Network Settings

    If none of the previous
    ways did not help, then you should reset the network settings. At the same time, saved Wi-Fi networks, passwords to
    him and VPN and APN parameters.

    1. Open the Settings app. Open settings
    2. Go to the "General" section. Go to the "Basic" section
    3. Go to the "Reset" section. Go to the "Reset" section
    4. Click the "Reset Network Settings" button and confirm the action. Click the Reset Network Settings button

    Support

    In the event that after
    all the previous steps have not been resolved, one thing remains - to contact support, but for
    First you need to find out which one. Remove the SIM card and try using it on another device. If there she is
    gives an error or does not fulfill any tasks, then go to the official website of your operator. On
    On the main page you will see the button "Support", "Ask a question" or "Problems using a SIM card."
    Click on it and fill in the required fields, expanding and clearly describing the situation and ways that are not
    helped her
    decide.

    Press the “Support” button to contact support

    If the SIM card worked in another phone, then, then, the problem lies in the IPhone. AT
    In this case, contact Apple official support (https://support.apple.com/en-us).

    1. Having gone to the website, click the "Contact Support" button. Click the button "Contact Support"
    2. In the "Contact us" section, click the "Help" button. Click the Help button
    3. Select the device on which your SIM card does not work. Choosing the right device
    4. Go to the “Cellular and Wi-FI” section. Select the section "Cellular and Wi-Fi"
    5. Next, select the case closest to you and follow the instructions on the site. Choose the most appropriate type of problem

    In modern IPhone models there is an IMessage service that allows you to exchange messages and media files between owners of Apple technology. But if for some reason you don’t want to use it, you can turn on cellular and MMS using the phone’s settings and start using them. If you have any problems when sending or receiving SMS or MMS, check the signal strength, reboot the device and reinsert the SIM card. If this does not help, you will have to reset the cellular settings. If the reset did not help, contact the support service of your mobile operator or Apple, depending on what the cause of the problem is.

    Can I configure MMS automatically?

    You can request MMS settings in one of three ways:

      Call the operator’s hotline number and find out if MMS can be independently adjusted. Most likely, instead of a consultation, a Call Center employee will offer the user to receive SMS settings. Contact the operator’s office in person and ask the employees to set up the iPhone. In the salons of communication services related to the options of the operator (including MMS settings) are provided free of charge. If employees start asking for money, ask them to provide a price list of paid services - the multimedia messaging service settings will definitely not be in this list. Send a free empty SMS or dial a short number. The list of numbers of the most famous operators is presented below:

    MTS

    Megaphone

    Beeline

    SMS number

    Call number

    As soon as the message with the settings arrives, you need to open it and press the "Save". After that it is already possible to check whether MMS works.

    MMS settings are meaningless if the service of the same name is not activated on the number.

    The MMS service is part of the basic package of options and is automatically connected to all numbers, however, it can be deleted due to some malfunction on the part of the operator or the intervention of a user who does not understand. This means that before setting up, you should call the operator’s support service and check if the MMS is present on the number. You can also use your personal account.

    How to configure MMS manually?

    Why do users have to refuse to automatically configure the MMS function? For two reasons.

    First of all, when calling a short number, you have to listen to the advertisement and go through several steps in the menu, which is very tiring. Uncertainty and the inability to connect with a “live” specialist are two of the main problems of Russian support services.

    Secondly, not all cellular service providers provide automatic configuration namely iPhone. For example, in response to a Beeline data request from iPhone 4 / 4S, this message appears:

    Manually enabling MMS on iPhone is not so difficult - you need to follow this instruction:

    Step 1. In the settings go to the "Cell network».

    Step 2. Next, find the subsection "Cellular data network».

    Step 3. Find the block "MMS»And enter the following data (unique for each of the operators) in its fields:

    Set up MMS on iPhone

    As a rule, the phone does not need any MMS settings - all the necessary parameters are set automatically by the cellular operator. However, if the attempt to send the file was unsuccessful, you should try to manually enter the necessary parameters.

      To do this, open the settings and select the section "Cellular". In the next window, open the section "Cellular data network".

    MTS

    • APN - specify mms.mts.ru,
    • Username and password - enter in both columns "Mts" (without quotes)
    • MMSC - http: // mmsc,
    • MMS proxy — 192.168.192.192:8080,
    • Maximum message size — 512000,
    • MMS URL UAProf - do not fill in the field.

    Tele 2

    • APN - mms.tele2.ru,
    • Username and password - do not fill in these fields,
    • MMSC - http://mmsc.tele2.ru,
    • MMS proxy — 193.12.40.65:8080,
    • Maximum message size — 1048576,
    • MMS URL UAProf - do not fill out.

    Yota

    • APN - mms.yota,
    • Username - mms,
    • Password - leave the field empty,
    • MMSC - http: // mmsc: 8002,
    • MMS proxy — 10.10.10.10,
    • Maximum message size - leave the field empty,
    • MMS URL UAProf - do not fill out.

    Beeline

    • APN - mms.beeline.ru,
    • Username - beeline,
    • Password - leave the field empty,
    • MMSC - http: // mms,
    • MMS proxy — 192.168.94.23:8080,
    • Maximum message size - do not fill in the field,
    • MMS URL UAProf - leave it blank.

    Megaphone

    • APN - mms,
    • Username and password - write in both columns "Gdata" (without quotes)
    • MMSC - http: // mmsc: 8002,
    • MMS proxy — 10.10.10.10,
    • Maximum message size - do not fill out
    • MMS URL UAProf - do not fill out.
  • When the necessary parameters are specified, close the window. From now on, sending MMS should work correctly.
  • Such simple recommendations will allow you to configure MMS to be able to transfer multimedia files through the standard Messages application.

    Thank the author, share the article on social networks.

    Pin
    Send
    Share
    Send
    Send